Felt Q620 2012
Made with a 6061 butted aluminum frame, the Q620 is a fully capable off-road machine. With its SunTour XCM-HLO suspension fork that can be switched from lock-out mode to 100mm of plush travel, the Q620 can tackle dirt paths or more rugged singletrack. It’s 27-speed Shimano Alivio shifters and hydraulic disc brakes will help you tackle steep climbs and descents.
- Finish: Matte Navy
- Sizes: 26"" x 13.5"",15.5"", 17.5"",19.5"",21.5""
- Frame: Felt Q series 6061 butted aluminium, Dynaform top and down tube: oversized semi-integrated head tube, replaceable derailleur hanger, rack & fender mount, disc brake specific
- Fork: SR Suntour SF12-XCM pm HLO 100mm travel: hydraulic lockout, hi-ten 1-1/8"" steerer tube, forged + cnc 6061 crown, two sides coil spring + mcu, w/ low-profile mini boots and preload adjust, disc brake specific lowers
- Headset: Semi-integrated 1-1/8"" Aheadset: steel cups, caged bearing, w/ felt Tornado alloy top cap, custom curved 1 x 15mm + 2 x 5mm straight washers
- Stem: Felt MTB 3D-forged design: 4-bolt handlebar clamp, 1-1/8"" threadless, for 31.8mm handlebar, 7 degree rise, w/ CP Cromo hardware Sizes; 13.5-17.5=90mm;19.5-21.5=110mm
- Handlebar: Felt MTB XC riser bar: butted 6061 Aluminium, 8 degree bend, 4 degree up sweep 31.8mm bar bore, Widths: 13.5""/15.5""""=620mm, 17.5""-21.5""=640mm
- Grips: Felt dual-density wing grips: Kraton rubber base, Pruven rubber centre, Colour matched
- Bar Ends: Felt Wing Icon end plugs
- Shifters: Shimano SL-M390 9 speed Rapid Fire
- Front Derailleur: Shimano FD-M390: top swing
- Rear Derailleur: Shimano Alivio: M430-SGS, long cage 9 speed
- Crankset: Shimano Alivio , FC-M430 9 Speed: 44X32X22T chainrings, lengths 13.5/15.5""= 170mm; 17.5/21.5""=175mm
- Bottom Bracket: Shimano UN-26 Sealed Cartridge
- Pedals: VP 992-S Steel Cage w/ PP Body
- Chain: KMC Z99 9-speed
- Freewheel: Sram PG-950 9-speed 11-32
- Brake Levers: Shimano BL-M446 2.5 finger lever
- Brakes: Tektro Draco hydraulic disc brake: SM- RT53 180mm front/ 160mm rear Centrelock rotors
- Cables: Custom Felt derailleur cable set: featuring stamped Felt logos & FELT rubber 2-tone tube tops at head tube and one CNC alloy ferrule at RD.
- Saddle: Felt mountain design: low side profile look w/ comfort fit top, double-density base, satin steel rails
- Seat Post: Felt alloy micro adjust: 6061 alloy Low-Profile forged Head & Extruded Rail Clamps, Sizes: 13.5-15.5"" =30.9mm x 350mm, 17.5/21.5"" =30.9mm x 400mm
- Seat Post Clamp: Felt bolt-type: cold forged + CNC, 6061 aluminium, w/ steel barrel nut design, 34.9mm
- Rims: WTB SX-17 disc brake doublewall aluminium: w/ single eyelets
- Front Hub: Forged alloy 6-bolt disc mount: 32 hole, w/ alloy quick release
- Rear Hub: Forged alloy 6-bolt disc mount, 8/9 speed cassette: 32 hole, w/ alloy quick release lever
- Spokes: Stainless 14g w/ brass nipples
- Tires: Felt THC XC tire: Trail Highway City 26 x 2.1 30tpi wire wead, w/ Shraeder valve tubes
| Hybrid Sizing Guide |
| Height |
Inside Leg |
Frame Size |
| 4'10" + |
26" - 28" |
14" |
| 5'0" + |
27" - 29" |
15" |
| 5'2" + |
27" - 29" |
16" |
| 5'4" + |
28" - 30" |
17" |
| 5'6" + |
28" - 30" |
18" |
| 5'8" + |
29" - 31" |
19" |
| 5'10" + |
30" - 32" |
21" |
| 6'0" + |
32" - 34" |
22" |
About Felt Bicycles
At Felt, our mission is simple: To design, develop, and deliver the best bicycles in the world. Period.
Our roots go back more than 20 years, to the man whose name appears on the downtube. It all started in the late 1980’s when Jim Felt, an ace motocross mechanic at the time, designed and built a triathlon bike for motocross star Johnny O’Mara. Johnny was competing in triathlons for training and asked Jim to build him a new tri bike.
Since then, the Felt brand has grown well beyond its racing roots, but the guiding principle remains the same. Every Felt bike – road or off-road, high end performance to entry level recreation-is meant to make the cycling experience the best it can be. Whether climbing the steepest peaks of the Tour de France, bombing singletrack trails, racing a first triathlon or commuting to work, each promises uncompromised performance, comfort, and efficiency.
Ten years after he built that first triathlon bike, Jim wanted to expand and make his bikes available to more riders. Enter Bill Duehring and Michael Muellmann. Bill, a bike industry veteran, wanted to be a part of a company that could capitalize on his years of product development experience and strong relationships with suppliers all over the world. Michael owned a successful distribution company in Europe.
A bicycle company had never been established with so much experience from day one. The day Felt incorporated, it had more than 70 years combined experience developing, manufacturing and selling high-quality bicycles. “We don’t want to be the biggest bike company in the world, just the best,” is a maxim often uttered by Jim, Bill and Michael.
Click
here for more on Felt Bicycles